USULAN PERBAIKAN TATA LETAK AREA GUDANG PRODUKSI BAHAN BAKU VENEER MENGGUNAKAN METODE CRAFT DI CN VENEER

Authors

  • Muhammad Alan Nazid Solih Universitas Islam Nahdlatul Ulama Jepara
  • Gunawan Mohammad Universitas Islam Nahdlatul Ulama Jepara
  • Budi Lovian Universitas Islam Nahdlatul Ulama Jepara

DOI:

https://doi.org/10.51903/juritek.v5i2.5085

Keywords:

Layout Optimization; Warehouse Design; CRAFT; Material Handling; CN Veneer; Production Efficiency; OMH; Industrial Layou(;)

Abstract

This study aims to improve the warehouse layout of raw material production at CN Veneer, Jepara, through the application of the CRAFT (Computerized Relative Allocation of Facilities Technique) method. The current layout presents inefficiencies in terms of long material handling distances and limited maneuverability due to narrow aisles and disorganized material storage. By employing data collection methods such as observation, direct measurement, and interviews with warehouse staff, this research developed a layout model that minimizes total material handling costs (OMH). Using iterative simulations, the CRAFT method generated an optimized layout alternative that significantly reduces travel distance, handling time, and improves spatial efficiency. The final layout proposal shortens material routes, improves accessibility, and enhances operational effectiveness in the warehouse.

References

[1] A. Heragu, Facilities Design, 5th ed. Boca Raton: CRC Press, 2022.

[2] M. Muther, Systematic Layout Planning (SLP), 2nd ed. Atlanta: Management & Industrial Research Publications, 1973.

[3] N. S. Tjokroamidjojo, Perencanaan dan Pengendalian Produksi, Yogyakarta: BPFE, 2006.

[4] A. S. Nugroho dan I. R. Kartikasari, “Perancangan Tata Letak Fasilitas Menggunakan Metode CRAFT untuk Meminimasi Ongkos Material Handling,” Jurnal Rekayasa dan Manajemen Sistem Industri, vol. 9, no. 2, pp. 129–137, 2021, doi: 10.26593/jrmsi.v9i2.3897.

[5] S. Rusindiyanto dan A. Susanto, “Analisis Tata Letak Gudang Menggunakan Metode CRAFT untuk Menurunkan Biaya Material Handling,” Jurnal Teknik Industri, vol. 7, no. 1, pp. 10–18, 2019.

[6] M. A. Nazid dan G. Mohammad, “Usulan Perbaikan Tata Letak Area Gudang Produksi Bahan Baku Veneer Menggunakan Metode CRAFT di CN Veneer,” Skripsi, Univ. Islam Nahdlatul Ulama Jepara, 2025.

[7] I. Wattimena dan E. Edwin, “Optimasi Tata Letak Fasilitas Menggunakan CRAFT dan Perbandingan Biaya,” Jurnal Teknologi dan Sistem Komputer, vol. 3, no. 2, pp. 45–51, 2015.

[8] T. Sutrisno, “Manajemen Gudang dan Distribusi,” Jurnal Logistik Bisnis, vol. 4, no. 1, pp. 30–37, 2020.

[9] I. Setiawan dan M. A. Rifa’i, “Perancangan Ulang Tata Letak Gudang dengan Pendekatan SLP dan CRAFT,” Jurnal Optimasi Sistem Industri, vol. 19, no. 1, pp. 17–25, 2020.

[10] S. R. Saputra, “Implementasi Lean Manufacturing dan Tata Letak U-Shape pada Pabrik UMKM,” Jurnal Manajemen Industri dan Logistik, vol. 6, no. 2, pp. 66–75, 2022.

[11] J. Tompkins et al., Facilities Planning, 4th ed. Hoboken, NJ: Wiley, 2010.

[12] A. R. Taha, Operations Research: An Introduction, 10th ed. Pearson, 2017.

[13] A. A. Tholib, M. Zainuri, dan A. E. Dwi, “Perancangan Tata Letak Fasilitas Produksi dengan Metode CRAFT dan SLP,” Jurnal Teknik Industri UNISSULA, vol. 7, no. 1, pp. 33–40, 2021.

[14] D. Wibowo dan H. Ramadhan, “Optimasi Tata Letak Gudang Menggunakan CRAFT dan Simulasi ARENA,” Jurnal Teknik Industri, vol. 8, no. 2, pp. 20–28, 2022.

[15] S. Chan dan D. W. Miller, “An Enhanced CRAFT Algorithm for Layout Design,” Computers & Industrial Engineering, vol. 29, no. 1–4, pp. 303–306, 1995.

[16] R. Kusiak dan S. Heragu, “The Facility Layout Problem,” European Journal of Operational Research, vol. 29, no. 3, pp. 229–251, 1987.

[17] D. Wu, X. Li, dan H. Zhang, “Hybrid CRAFT and Genetic Algorithm for Flexible Facility Layout Optimization,” Procedia Manufacturing, vol. 17, pp. 826–833, 2018.

[18] P. Liker, The Toyota Way, New York: McGraw-Hill, 2004.

[19] S. Nahmias, Production and Operations Analysis, 7th ed. Waveland Press, 2019.

[20] D. Chopra dan P. Meindl, Supply Chain Management: Strategy, Planning, and Operation, 6th ed. Pearson, 2016..

Downloads

Published

2025-07-26

How to Cite

Muhammad Alan Nazid Solih, Gunawan Mohammad, & Budi Lovian. (2025). USULAN PERBAIKAN TATA LETAK AREA GUDANG PRODUKSI BAHAN BAKU VENEER MENGGUNAKAN METODE CRAFT DI CN VENEER. Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 5(2), 472–483. https://doi.org/10.51903/juritek.v5i2.5085