Analisis Tren Penelitian Sambungan Baut dan Las pada Baja H-Beam Menggunakan Pendekatan Bibliometrik
DOI:
https://doi.org/10.51903/juritek.v6i2.7231Keywords:
Bibliometric Analysis, Bolted Connection, Welded Connection, H-Beam Steel, VosviewerAbstract
Research on bolted and welded connections in H-beam steel structures has continued to grow due to the increasing demand for strong, efficient, and earthquake-resistant steel structures. This study aims to analyze publication trends, researcher collaboration patterns, and thematic developments related to bolted and welded connections using a bibliometric approach. The data were obtained from the Scopus database consisting of 302 publications from 2019 to 2025. The analysis was conducted using Bibliometrix in RStudio and visualized using VOSviewer. The results show that the number of publications increased significantly each year, indicating growing research interest in steel connection studies. Keyword analysis revealed that the dominant topics include bolted connections, finite element methods, seismic design, and structural health monitoring. The thematic mapping indicates that stiffness, energy dissipation, and structural performance are the main research focuses. In addition, co-authorship analysis demonstrates active scientific collaboration among researchers in the development of steel connection studies. Overall, research on bolted and welded connections in H-beam steel structures is developing toward a multidisciplinary approach integrating numerical analysis, structural performance evaluation, and modern monitoring technology.
References
[1] M. Eldeib et al., “Structural behaviour of steel-timber composite elements: an overview,” Low-Carbon Mater. Green Constr., vol. 3, no. 1, 2025, doi: 10.1007/s44242-025-00065-x.
[2] W. Deng et al., “Flexural Behavior of Lap Splice Connection Between Steel-Plate Composite Wall and Reinforced Concrete Foundation Subjected to Impact Loading,” Buildings, vol. 15, no. 15, 2025, doi: 10.3390/buildings15152707.
[3] F. Amin et al., “Impact of Carbon Fiber-Reinforced Polymer Sheets and Bolt Diameter on the Seismic Performance Enhancement of Steel Beam-Column Joints,” Eng. Reports, vol. 7, no. 1, pp. 1–17, 2025, doi: 10.1002/eng2.13022.
[4] H. Yu et al., “Critical slowing down characteristics of acoustic emission for bolted fractured sandstone failure under stepwise loading,” Geomech. Geophys. Geo-Energy Geo-Resources, vol. 11, no. 1, 2025, doi: 10.1007/s40948-025-01045-y.
[5] Y. Zhou, J. Duan, G. Mao, and J. Hong, “Tailored assembly interface for high-performance bolted structures,” Mater. Des., vol. 260, no. 2, p. 114965, 2025, doi: 10.1016/j.matdes.2025.114965.
[6] et al. Syamsuir, “Karakteristik Sifat Mekanik dan Struktur Mikro Baja Karbon Sedang Paska Tempering,” Jktm, vol. 7, no. 1, pp. 1–7, 2021.
[7] D. S. -, Sutrimo, Gugun Nugraha, Hanni Maksum Ardi, and Toni Okviyanto, “Analisis Sifat Mekanik Baja Karbon ST 37 Pada Variasi Kuat Arus dan Sudut Kampuh SMAW,” J. Elektro dan Mesin Terap., vol. 9, no. 1, pp. 1–10, 2023, doi: 10.35143/elementer.v9i1.5886.
[8] S. L. Narayana, K. L. Narasimhamu, N. A. Krishna, B. V. V. Naidu, and C. Deekshith, “Effect of chemical treatment on mechanical properties of fiber reinforced composites,” Mater. Today Proc., vol. 2022, 2022, doi: 10.1016/J.MATPR.2022.07.128.
[9] Junaidi and A. Irawan, “725-Article Text-2895-1-10-20230622,” Jitekh, vol. 7, no. 2, pp. 57–61, 2019.
[10] Y. Li, L. Jiang, C. Xiong, and W. Peng, “Effect of Different Surface Treatment for Bamboo Fiber on the Crystallization Behavior and Mechanical Property of Bamboo Fiber/Nanohydroxyapatite/Poly(lactic-co-glycolic) Composite,” Ind. Eng. Chem. Res., vol. 54, no. 48, pp. 12017–12024, 2015, doi: 10.1021/acs.iecr.5b02724.
[11] D. S. Wongso, M. Rajagukguk, and Danial, “Studi Perencanaan Proteksi Tegangan Lebih Eksternal Petir Di Plts 1,5 Mw Universitas Tanjungpura,” J. S1 Tek. Elektro UNTAN, vol. 2, no. I, pp. 113–125, 2022, [Online]. Available: https://jurnal.untan.ac.id/index.php/jteuntan/article/download/60256/75676595445
[12] B. P. H. Deeves and J. E. Woods, “Experimental investigation of steel-timber shear connections with self-tapping screws,” Constr. Build. Mater., vol. 492, no. April, p. 142999, 2025, doi: 10.1016/j.conbuildmat.2025.142999.
[13] H. Li, Y. Luo, Y. Guo, Y. Tian, C. Zhou, and R. Lorenzo, “Mechanical properties of bamboo scrimber under bolted connections with steel splints,” Sustain. Struct., vol. 5, no. 4, pp. 1–17, 2025, doi: 10.54113/j.sust.2025.000091.
[14] M. Saripuddin, H. Abbas, H. Parung, and W. H. Piarah, “Analisis Pengaruh Sambungan Kombinasi Las dan Baut terhadap Kekuatan Material,” no. Snttm Xiii, pp. 15–16, 2014.
[15] M. B. Sulistiyo et al., “MENGGUNAKAN PROGRAM BANTU ELEMEN HINGGA,” vol. 13, no. 3, pp. 199–206, 2019.
[16] E. Widyaningsih, E. Desmaliana, and M. Ihsan, “Evaluasi Konfigurasi Sambungan Baut Jembatan Rangka Baja dengan Pola Staggered Fastener ( Studi Kasus : Jembatan Way Bobot , Pulau Seram ),” vol. 7, no. 2, 2021.
[17] F. Teknik, U. Islam, and J. Q. Teknika, “ANALISIS SAMBUNGAN KONTRUKSI RANGKA ATAP BAJA BERAT IWF PADA BANGUNAN GUDANG MENGGUNAKAN PEMODELAN EKSPERIMENTAL DENGAN SPESIFIKASI SNI 03-1729-2002.,” vol. 12, no. 1, pp. 121–127, 2022, [Online]. Available: https://ejournal.unisbablitar.ac.id/index.php/qua
[18] A. Bibliometrik, P. Penelitian, and D. A. N. Publikasi, “Analisis bibliometrik: perkembangan penelitian dan publikasi mengenai koordinasi program menggunakan vosviewer,” vol. 9, no. 1, pp. 1–8, 2022, [Online]. Available: https://journal.unilak.ac.id/index.php/pb/%0A1
[19] Z. H. Ibupoto et al., “Advances in MoS2 composites for electrocatalytic energy conversion: Synthesis, applications, and future perspectives in hydrogen, oxygen, nitorgen, and CO2 reactions,” Renew. Energy, vol. 256, no. PI, p. 124582, 2026, doi: 10.1016/j.renene.2025.124582.
[20] A. Ajwad, S. Di Benedetto, M. Latour, and G. Rizzano, “Stiffness of welded T-joints with CHS chord members and passing-through longitudinal plates,” Structures, vol. 71, no. December 2024, p. 107963, 2025, doi: 10.1016/j.istruc.2024.107963.
[21] A. Vasilkin and G. Zubkov, “Stress-Strain State of Slip-Critical Connections in Metal Structures, With Regard To the Specifics of Bolt Tension Control,” Int. J. Comput. Civ. Struct. Eng., vol. 21, no. 4, pp. 162–176, 2025, doi: 10.22337/2587-9618-2025-21-4-162-176.
[22] D. P. Wu, K. Rao, W. Wei, F. Han, and S. Peng, “Experimental Study on Seismic Behavior of Novel Prefabricated RC Joints with Welded Cover-Plate Steel Sleeve and Bolted Splice,” Buildings, vol. 15, no. 24, pp. 1–20, 2025, doi: 10.3390/buildings15244579.
[23] A. Sanli, B. Demirkale, and O. Kanoun, “Real-time detection of loosening torque in bolted joints using piezoresistive pressure-sensitive layer based on multi-walled carbon nanotubes reinforced epoxy nanocomposites,” Sci. Rep., vol. 15, no. 1, pp. 1–9, 2025, doi: 10.1038/s41598-025-89290-9.
[24] B. Rao et al., “Seismic Performance of T-Shaped Aluminum Alloy Beam – Column Bolted Connections : Parametric Analysis and Design Implications Based on a Mixed Hardening Model,” pp. 1–24, 2025.
[25] M. Al-mahbashi, H. Elsanadedy, A. Abadel, and T. Almusallam, “Performance of HSC Continuous Deep Beams with Asymmetric Circular Openings : Hybrid FRP Versus Steel Plate Strengthening,” 2025.
[26] V. L. Las, “Akselerasi : Jurnal Ilmiah Teknik Sipil Akselerasi : Jurnal Ilmiah Teknik Sipil,” vol. 2, no. 1, 2020.
[27] F. Jafari and S. Dorafshan, “SDNET 2025- Annotated dataset of steel bolted connection evaluation,” Data Br., vol. 63, 2025, doi: 10.1016/j.dib.2025.112254.
[28] M. W. Schäfer, M. M. Becker, and S. C. L. Fischer, “Coded excitation strategies to ensure the validity of ultrasound controlled tightening of bolted joints,” NDT E Int., vol. 156, no. June, p. 103467, 2025, doi: 10.1016/j.ndteint.2025.103467.
[29] H. Nan, J. Qiao, S. Ding, Y. Chen, P. Jiang, and S. Wei, “Strength, deformation and macro and micro-failure performances of the bolted samples under biaxial compression,” Sci. Rep., vol. 15, no. 1, pp. 1–24, 2025, doi: 10.1038/s41598-025-19667-3.
[30] S. S. Sorour, C. A. Saleh, and M. Shazly, “Integrating machine learning and symbolic regression for predicting damage initiation in hybrid FRP bolted connections,” Sci. Rep., vol. 15, no. 1, pp. 1–19, 2025, doi: 10.1038/s41598-025-02390-4.
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
.png)
