Optimalisasi Tata Kelola Keselamatan Proses dan Perlindungan Lingkungan Melalui Pendekatan Sistem Manajemen Terpadu di Pabrik X

Achmad Zulfikar Badarudin Litiloly; Natalis Situmorang

doi:10.55606/jimak.v5i2.6494

Authors

Achmad Zulfikar Badarudin Litiloly Universitas Sahid Jakarta
Natalis Situmorang Universitas Sahid Jakarta

DOI:

https://doi.org/10.55606/jimak.v5i2.6494

Keywords:

Environmental Protection, Factory X, Integrated Management System, PDCA, Process Safety

Abstract

This research aims to analyze and optimize process safety management and environmental protection at Factory X through an Integrated Management System IMS approach. Along with the increasing operational complexity of the manufacturing industry, the integration of process safety and environmental aspects has become crucial for mitigating the risk of major accidents and ecosystem pollution. This study employs a descriptive qualitative method with a case study approach, where evaluation is conducted based on the Plan-Do-Check-Act PDCA cycle, encompassing safety policy, organization, planning, performance evaluation, and improvement actions. The results indicate that although Factory X has established a formal policy foundation, operational effectiveness is still hindered by a lack of specialized competency within the HSE organization and the dominance of reactive performance indicators (lagging indicators). This study recommends the establishment of a specialized process safety unit, the utilization of digital technology for real-time asset monitoring, and the strengthening of incident reporting cultures to ensure continuous improvement. This optimization is expected to simultaneously reduce the potential risk of process failure and enhance compliance with environmental quality standards.

References

Abad, J., Lafuente, E., & Vilajosana, J. (2020). An assessment of the OHSAS 18001 certification’s effects on occupational injury rates. Safety Science, 124, 104592. https://doi.org/10.1016/j.ssci.2020.104592

Al-Thani, N., Ahmed, M. S., & Koç, M. (2022). Process safety management (PSM) in the 4th industrial revolution: A review of opportunities and challenges. Safety Science, 150, 105704. https://doi.org/10.1016/j.ssci.2022.105704

Center for Chemical Process Safety (CCPS). (2018). Guidelines for implementing process safety management. Wiley.

Center for Chemical Process Safety (CCPS). (2021). Guidelines for integrating management systems. Wiley-AIChE.

Crowl, D. A., & Louvar, J. F. (2019). Chemical process safety: Fundamentals with applications (4th ed.). Pearson Education.

Gnoni, M. G., Bragatto, P. A., Milazzo, M. F., & Setola, R. (2021). Integrating safety and security in the process industry: A review of methods and software tools. Journal of Loss Prevention in the Process Industries, 71, 104443. https://doi.org/10.1016/j.jlp.2021.104443

Grozdanovic, I., Stojiljkovic, E., & Belic, I. (2022). Process safety management: A link between safety and environmental protection. Sustainability, 14(3), 1540. https://doi.org/10.3390/su14031540

International Organization for Standardization. (2018). Occupational health and safety management systems — Requirements with guidance for use (ISO Standard No. 45001:2018).

Kumasaki, M., Katoh, H., & Okada, K. (2022). Environmental risk management in chemical process safety: Recent trends and challenges. Journal of Chemical Engineering of Japan, 55(4), 180–192. https://doi.org/10.1252/jcej.22we155

Luo, Y. (2024). Synergizing process safety and environmental sustainability: A framework for green chemical manufacturing. Journal of Cleaner Production, 412, 137350. https://doi.org/10.1016/j.jclepro.2023.137350

Moraes, G. L. R., Gouvêa, M. A., & Ladeira, W. J. (2019). Integration of management systems: An exploratory study on benefits and barriers. Journal of Cleaner Production, 223, 312–324. https://doi.org/10.1016/j.jclepro.2019.03.133

Nielsen, K. J., Lucas, G. W., & Sormani, M. (2021). Quality of process safety management audits: A systematic review. Safety Science, 138, 105214. https://doi.org/10.1016/j.ssci.2021.105214

Pasman, H. J., & Rogers, W. J. (2020). How can we improve process safety performance? Journal of Loss Prevention in the Process Industries, 66, 104185. https://doi.org/10.1016/j.jlp.2020.104185

Perdana, M. P., Qurotulaen, M., Saputra, A., Akbar, E. M., Samosir, H. Q., Ardian, G., Riadi, N., Sapari, E., Muldani, A., Utami, M. S., Assydieq, R. F., Hasanah, A. N., Azizah, Z., Kharisandi, Y., Prasetio, I. P., Nurjanah, S., & Riswanti, P. (2025). Mewujudkan desa yang berbudaya, peduli lingkungan melalui program KKN konservasi dan budaya di desa Sindangsari. 1.

Permana, R., & Andhikawati, A. (2023). Penanaman bibit mangrove di kawasan Tanjung Cemara Kabupaten Pangandaran sebagai upaya perlindungan wilayah pesisir. Farmers: Journal of Community Services, 4(1), 11. https://doi.org/10.24198/fjcs.v4i1.45067

Putri, A. N., Nevrita, N., Hindrasti, N. E. K., & Sarkity, D. (2022). Penanaman sikap cinta lingkungan melalui edukasi pelestarian ekosistem mangrove pada siswa. JPPM (Jurnal Pengabdian dan Pemberdayaan Masyarakat), 5(1), 103. https://doi.org/10.30595/jppm.v5i1.9021

Rini, E. I. H. A. N., & Rahmah, Y. (2019). Penanaman pohon mangrove di desa Mangunharjo Tugu Semarang sebagai bentuk kepedulian lingkungan. Jurnal HARMONI, 3(2).

Rohman, M., Sulaiman, M., Fadliana, A., Tjiptady, B. C., & Choirina, P. (2022). Upaya pelestarian lingkungan melalui penanaman bibit pohon di desa Palaan, Kabupaten Malang. Jurnal Andalas: Rekayasa dan Penerapan Teknologi, 1(2), 57–60. https://doi.org/10.25077/jarpet.v1i2.12

Tafsir, M., Djaharuddin, D., Razak, N., Rajab, A., & Lalo, A. (n.d.). Kepedulian terhadap lingkungan: Penanaman pohon ketapang cendana di lapangan desa Pattalassang, Gowa. Jurnal Abdimas Bongaya, 2(1), 22–28.

Tina, M., Yuniarti. Zs, N., Lantowa, F. D., & Ranidiah, F. (2025). Perbaikan lingkungan melalui penanaman pohon kolaborasi mahasiswa pertukaran dan pecinta alam di Universitas Muhammadiyah Gorontalo. RENATA: Jurnal Pengabdian Masyarakat Kita Semua, 3(2). https://doi.org/10.61124/1.renata.189

Wattimena, L., Turot, A., Pattiwael, M., Hetharia, C., & Loppies, Y. (n.d.). Kepedulian terhadap lingkungan: Penanaman bibit pohon di taman wisata alam (TWA) Kota Sorong Provinsi Papua Barat.